By ·

Motorcycle comparison · Naked Bike vs Sport Tourer

Yamaha MT-07 (RM04) vs Kawasaki ER-6f (ER6f-MY2006)

Yamaha MT-07 vs Kawasaki ER-6f: where they split, and which one to buy.

You'll feel the Yamaha MT-07's front wheel go light the moment you crack the throttle from a stop. The Kawasaki ER-6f's twin doesn't snatch at that same twist; it gathers speed in one smooth push. Its midrange does the real pulling.

Yamaha MT-07 (RM04) and Kawasaki ER-6f (ER6f-MY2006) side by side
Yamaha MT-07 (RM04) 2014–2017 · Raw Twin, Weightless Handling Kawasaki ER-6f (ER6f-MY2006) 2006–2017 · Reliable Middleweight That Simply Works

So which one do you buy?

The MT-07 has the edge if…

Sporty riding on twisty roads

Inches ahead: MT-07

The MT-07 nudges ahead once the pavement starts to wiggle. Don't expect a night-and-day difference.

The ER-6f has the edge if…

Traveling with luggage

Edges it: ER-6f

With bags on, the ER-6f edges ahead. The gap is small enough that luggage options could flip it.

What makes each one tick

MT-07

The MT-07's crossplane crank thumps out an uneven, V-style beat, and it's already shoving hard from low revs. On the Back of the Dragon, corner entry's quick: the bar tips the bike in the instant you ask. The light chassis feels supermoto-sharp. The crank's offbeat thump never gets old.

ER-6f

The ER-6f sits you upright at the bar while its fairing keeps the wind off your chest. Its engine's strongest through the middle revs, and it isn't fussy about which gear you're in. Over a bump, the long swingarm keeps the ER-6f tracking steady. The compact frame darts through traffic.

Nils rode the ER-6f in Sicily in 2006 (1000PS test report).

The Voice of Experience

Portrait of NastyNils

What actually separates them

  • The ER-6f has the lower seat: 30.9 in (785 mm) vs 31.7 in (805 mm).
  • The MT-07 has the lower wet weight: 401 lb (182 kg) vs 441 lb (200 kg).
  • The MT-07 makes more peak torque: 50 lb-ft (68 Nm) vs 47 lb-ft (64 Nm).

See every difference ↓

Which one for the way you ride

Comfortable long-distance riding

No verdict: MT-07

The MT-07 gets left out of the long-distance question. It's built for a different kind of day.

There's no real gap on commuting and a first bike. Sit on both and let fit and price decide.

Who each one is built for

Appalachian Technical Corner Rider

Back of the Dragon · Blue Ridge Parkway · Cherohala Skyway

SoCal Canyon Performance Rider

Angeles Crest Highway · Coronado Trail · Highway 1

Scenic Sport-Touring Escapist

Black Hills · Blue Ridge Parkway · Cherohala Skyway

What's good, and what you'll live with

MT-07

Strengths

  • Easy To Trust Quickly
  • Cheap To Run
  • Light, Friendly Controls
  • Addictive CP2 engine character
  • Accessible for all skill levels

Trade-offs

  • Idle And Decel Cutouts
  • Fragile 5th Gear
  • Quick To Corrode
  • Budget build quality
  • Jerky throttle response at low RPM

ER-6f

What owners say

Strengths

  • Lively and flexible parallel-twin engine
  • Excellent value for money
  • Frugal fuel economy

Known problems to check before you buy

MT-07

  • Intermittent engine cutout at idle and during deceleration The engine cuts out intermittently, especially when idling at traffic lights or decelerating to a stop. The ECU appears to reduce fuel supply too aggressively at idle. Problem worsens in hot weather. Stalling during downshifting is particularly hazardous. Multiple NHTSA consumer complaints filed. Reportedly improved with ECU mapping adjustments in later production.
  • Battery loses charge during extended standstill Battery depletes when the bike sits for extended periods. Components draw power even when ignition is off. On models with parking light position, the ignition switch can cause parasitic draw if moisture enters. Some owners report charging system issues linked to the regulator/rectifier.
  • Instrument cluster LCD flickers, goes blank, or shows partial information LCD display develops flickering, blank sections, or complete failure. Causes include loose internal ribbon cable, water ingress, or corroded connector pins. Aftermarket replacement LCD modules available (same part 2014–2020 compatible).
  • Pronounced clutch rattle at idle; potential inner plate failure Pronounced rattling noise from the clutch at idle in neutral. Noise disappears when clutch lever is pulled in. In severe cases, inner clutch plates can break or shatter. Contributing factor may be worn clutch basket. More pronounced on cold starts.
  • Gear indicator fails to display correct gear (especially 5th/6th) The gear indicator in the LCD display fails to show the correct gear, particularly in 5th and 6th gear. The number flashes, disappears, or displays incorrect values. Root cause: dirty contacts on the gear position sensor. Cleaning is a temporary fix; sensor replacement (~40 USD) is the permanent solution. Yamaha developed a revised sensor.
  • Poor surface finishes on fasteners and coolant pipes Widespread corrosion across peripheral components: radiator coolant pipes (chrome with thin lacquer, deteriorates rapidly from road spray), allen key bolt heads, brake line fittings, disc bobbins, gear lever linkage, rear sprocket, suspension linkage fasteners, and seat lock (seizes). Screw heads across the frame show rust. Weld slag not properly cleaned on some frames.
  • Side stand safety switch causes unexpected engine cutout The bike starts normally in neutral but dies immediately when shifted into gear. Caused by the kickstand safety switch failing, corroding, or the starter cutoff relay malfunctioning. The switch connector is vulnerable to moisture ingress.
  • Surface rust on steel swingarm The steel swingarm develops surface rust, particularly underneath the chain guard and near chain adjusters. Rust can appear within months of purchase, even without winter riding. The paint/coating is thin and easily damaged by chain debris. Weld seams and areas under the chain slider are most affected. Yamaha has replaced some swingarms under warranty.

ER-6f

  • Frame cracking at engine mounts (early models) On early models, the high-tensile steel trellis frame can develop stress cracks around the upper engine mounting brackets due to engine vibration and mounting stress.

What they share

Engine
Parallel twin
Cooling
Liquid-cooled
Gearbox
6-speed
Final drive
Chain
Fork
Telescopic
Front tire
120/70-17

Where the spec sheets split

Seat height and weight
MT-07 ER-6f
Seat height 31.7 in (805 mm) 30.9 in (785 mm)
Wet weight 401 lb (182 kg) 441 lb (200 kg)
Engine, power and torque
MT-07 ER-6f
Displacement 689 cc 649 cc
Power 75 hp (55 kW) 72 hp (53 kW)
Peak power at 9,000 rpm 8,500 rpm
Torque 50 lb-ft (68 Nm) 47 lb-ft (64 Nm)
Peak torque at 6,500 rpm 7,000 rpm
Top speed 130 mph (210 km/h) 130 mph (209 km/h)
Fuel tank capacity
MT-07 ER-6f
Fuel capacity 3.7 US gal (14 L) 4.1 US gal (15.5 L)
Other specifications
MT-07 ER-6f
Front brake 282 mm 300 mm
Rear tire 180/55-17 160/60-17

What comes fitted, what costs extra

MT-07 ER-6f
Heated Grips Option Not offered

Head to head, area by area

Both bikes on the same scale, one area at a time.

Braking

Engine

Handling

Suspension

Comfort

Reliability

Practicality

Sporting Capability

Usability

Specs and equipment as of October 19, 2026. The riding calls use the same ratings behind both buyer's guides.