By ·

Motorcycle comparison · Naked Bike vs Retro Classic

Yamaha MT-07 (RM04) vs Husqvarna Vitpilen 801 (MY2025)

Yamaha MT-07 vs Husqvarna Vitpilen 801: two kinds of bike, and who each one is for.

At the green light, the Yamaha MT-07 won't keep its front wheel down once you crack the throttle. The same twist on the Husqvarna Vitpilen 801 builds into a shove that's strongest through the midrange. Its exhaust rasps like a V-twin's the whole way.

Yamaha MT-07 (RM04) and Husqvarna Vitpilen 801 (MY2025) side by side
Yamaha MT-07 (RM04) 2014–2017 · Raw Twin, Weightless Handling Husqvarna Vitpilen 801 (MY2025) 2025 · Built Clean, Corners Hard

So which one do you buy?

Buy the Vitpilen 801 if…

Keeping running costs low

Clear edge: Vitpilen 801

For a rider watching every dollar after the sale, the Vitpilen 801 is the clear choice.

The Vitpilen 801 has the edge if…

Daily commuting & city riding

A touch ahead: Vitpilen 801

The Vitpilen 801 edges it for the daily grind. Credit easier everyday riding. It's a small gap, not a reason on its own.

Sporty riding on twisty roads

Slight edge: Vitpilen 801

Back-road fun leans slightly toward the Vitpilen 801. That comes from harder acceleration and better suspension. It's a narrow call, so trust your test ride.

What makes each one tick

MT-07

The MT-07's crossplane twin beats with a V-twin's offbeat pulse and pulls hard from low revs. The throttle doesn't wait for revs: torque peaks at just 6,500 rpm. On the Back of the Dragon, the bar snaps the chassis into each bend, and it'll flick back out just as quick. It thumps like a big bike.

Vitpilen 801

The Vitpilen 801 tracks exactly where the bar points it, and the LC8c twin keeps pulling with real punch. There's give in the WP suspension when a bump hits. The stiff chassis holds its line. The tires keep biting deep into every bend.

The Voice of Experience

Portrait of NastyNils

What actually separates them

  • The MT-07 has the lower seat: 31.7 in (805 mm) vs 32.3 in (820 mm).
  • The MT-07 has the lower wet weight: 401 lb (182 kg) vs 418 lb (190 kg).
  • The Vitpilen 801 makes more peak power: 105 hp (77 kW) vs 75 hp (55 kW).

See every difference ↓

Which one for the way you ride

Comfortable long-distance riding

Not built for this

Big miles aren't where either one shines. You'll be watching for the next rest stop.

A confidence-building first motorcycle

Not its job: Vitpilen 801

The Vitpilen 801 has too much motor for a first bike. Get your basics down on something smaller.

Who each one is built for

Appalachian Technical Corner Rider

Back of the Dragon · Blue Ridge Parkway · Cherohala Skyway

SoCal Canyon Performance Rider

Angeles Crest Highway · Coronado Trail Scenic Byway · Big Sur Coast Highway

Texas Hill Country Weekend Rider

Texas Hill Country · Twisted Sisters · Circuit of The Americas

What's good, and what you'll live with

MT-07

Strengths

  • Easy To Trust Quickly
  • Cheap To Run
  • Light, Friendly Controls
  • Addictive CP2 engine character
  • Accessible for all skill levels

Trade-offs

  • Idle And Decel Cutouts
  • Fragile 5th Gear
  • Quick To Corrode
  • Budget build quality
  • Jerky throttle response at low RPM

Vitpilen 801

What owners say

Strengths

  • Comprehensive electronics package
  • Lively, characterful parallel-twin engine
  • Premium fit and finish

Trade-offs

  • Optional features add cost and complexity
  • Weight gain versus predecessor

Known problems to check before you buy

MT-07

  • Intermittent engine cutout at idle and during deceleration The engine cuts out intermittently, especially when idling at traffic lights or decelerating to a stop. The ECU appears to reduce fuel supply too aggressively at idle. Problem worsens in hot weather. Stalling during downshifting is particularly hazardous. Multiple NHTSA consumer complaints filed. Reportedly improved with ECU mapping adjustments in later production.
  • Battery loses charge during extended standstill Battery depletes when the bike sits for extended periods. Components draw power even when ignition is off. On models with parking light position, the ignition switch can cause parasitic draw if moisture enters. Some owners report charging system issues linked to the regulator/rectifier.
  • Instrument cluster LCD flickers, goes blank, or shows partial information LCD display develops flickering, blank sections, or complete failure. Causes include loose internal ribbon cable, water ingress, or corroded connector pins. Aftermarket replacement LCD modules available (same part 2014–2020 compatible).
  • Pronounced clutch rattle at idle; potential inner plate failure Pronounced rattling noise from the clutch at idle in neutral. Noise disappears when clutch lever is pulled in. In severe cases, inner clutch plates can break or shatter. Contributing factor may be worn clutch basket. More pronounced on cold starts.
  • Gear indicator fails to display correct gear (especially 5th/6th) The gear indicator in the LCD display fails to show the correct gear, particularly in 5th and 6th gear. The number flashes, disappears, or displays incorrect values. Root cause: dirty contacts on the gear position sensor. Cleaning is a temporary fix; sensor replacement (~40 USD) is the permanent solution. Yamaha developed a revised sensor.
  • Poor surface finishes on fasteners and coolant pipes Widespread corrosion across peripheral components: radiator coolant pipes (chrome with thin lacquer, deteriorates rapidly from road spray), allen key bolt heads, brake line fittings, disc bobbins, gear lever linkage, rear sprocket, suspension linkage fasteners, and seat lock (seizes). Screw heads across the frame show rust. Weld slag not properly cleaned on some frames.
  • Side stand safety switch causes unexpected engine cutout The bike starts normally in neutral but dies immediately when shifted into gear. Caused by the kickstand safety switch failing, corroding, or the starter cutoff relay malfunctioning. The switch connector is vulnerable to moisture ingress.
  • Surface rust on steel swingarm The steel swingarm develops surface rust, particularly underneath the chain guard and near chain adjusters. Rust can appear within months of purchase, even without winter riding. The paint/coating is thin and easily damaged by chain debris. Weld seams and areas under the chain slider are most affected. Yamaha has replaced some swingarms under warranty.

Vitpilen 801

No confirmed faults on file yet. That's not the same as fault-free.

What they share

Engine
Parallel twin
Cooling
Liquid-cooled
Fuel capacity
3.7 US gal (14 L)
Gearbox
6-speed
Final drive
Chain
Front tire
120/70-17
Rear tire
180/55-17

Where the spec sheets split

Seat height and weight
MT-07 Vitpilen 801
Seat height 31.7 in (805 mm) 32.3 in (820 mm)
Wet weight 401 lb (182 kg) 418 lb (190 kg)
Engine, power and torque
MT-07 Vitpilen 801
Displacement 689 cc 799 cc
Power 75 hp (55 kW) 105 hp (77 kW)
Peak power at 9,000 rpm 9,250 rpm
Torque 50 lb-ft (68 Nm) 64 lb-ft (87 Nm)
Peak torque at 6,500 rpm 8,000 rpm

What comes fitted, what costs extra

MT-07 Vitpilen 801
ABS Option Standard
Cornering ABS Not offered Standard
Traction Control Not offered Standard
Ride Modes Not offered Standard
Manually Adjustable Front Suspension Not offered Standard
Cruise Control Not offered Option
Quickshifter Not offered Option
Slipper Clutch Not offered Standard
TFT Display Not offered Standard
Smartphone Connectivity Not offered Standard
LED Headlight Not offered Standard

Head to head, area by area

Both bikes on the same scale, one area at a time.

Braking

Engine

Handling

Suspension

Comfort

Reliability

Practicality

Sporting Capability

Usability

Specs and equipment as of November 6, 2026. The riding calls use the same ratings behind both buyer's guides.