By NastyNils·
Motorcycle comparison · Naked Bike
Yamaha MT-07 (RM04) vs KTM 690 Duke (5)
Yamaha MT-07 vs KTM 690 Duke: no fairing, no excuses. Here's how to choose.
Off the line from a stop, the Yamaha MT-07's front wheel climbs at the first crack of throttle, and it doesn't take much skill. The KTM 690 Duke's single feels like a toy on the throttle at first. Then it's hauling you forward with real muscle.
So which one do you buy?
The 690 Duke has the edge if…
Daily commuting & city riding
Nose ahead: 690 Duke
Your daily ride leans slightly toward the 690 Duke. Fit and price can easily outweigh that.
Sporty riding on twisty roads
Slight edge: 690 Duke
In the twisties, the 690 Duke asks a bit less of you to go quickly. It's down to more feel through the bars and a sportier chassis. Call it a modest edge.
Which one's the smarter buy
Even on value
The price gap is too small to drive the decision. Neither bike is the clear better buy for the money.
What makes each one tick
MT-07
The MT-07's crossplane twin thumps with a V-twin's pulse and doesn't need wringing out to pull hard from low revs. On Back of the Dragon, there's no delay at corner entry: the bars answer every small input and the bike turns in quick. Fork and brakes hold their end. The crossplane's beat still hooks you every ride.
690 Duke
Supermoto reflexes run through the 690 Duke's trellis frame, and it's flicking from one bend to the next with a scalpel's precision. A mid-corner bump doesn't unsettle the WP suspension, which keeps talking back through the bars. It'll catch out a careless novice. The engine bites hard in that tight frame.
The Voice of Experience
What actually separates them
- The MT-07 has the lower seat: 31.7 in (805 mm) vs 32.9 in (835 mm).
- The 690 Duke makes more peak torque: 55 lb-ft (74 Nm) vs 50 lb-ft (68 Nm).
- ABS: standard on the 690 Duke, option on the MT-07.
Which one for the way you ride
Comfortable long-distance riding
Wrong job for both
Big miles aren't where either one shines. You'll be watching for the next rest stop.
Look at running costs and a first bike and you'll find two bikes doing the same job equally well. Fit is what breaks the tie.
Who each one is built for
What's good, and what you'll live with
MT-07
Strengths
- Easy To Trust Quickly
- Cheap To Run
- Light, Friendly Controls
- Addictive CP2 engine character
- Accessible for all skill levels
Trade-offs
- Idle And Decel Cutouts
- Fragile 5th Gear
- Quick To Corrode
- Budget build quality
- Jerky throttle response at low RPM
690 Duke
From Nils' own saddle time
Strengths
- Big Lean, Little Effort
- Front-End Feedback You Trust
- Flickable In The City
- Sharp, Modern Looks
- Ready To Personalize
Trade-offs
- Tall Seat, Toes Down
- Recalls To Verify
Known problems to check before you buy
MT-07
- Intermittent engine cutout at idle and during deceleration The engine cuts out intermittently, especially when idling at traffic lights or decelerating to a stop. The ECU appears to reduce fuel supply too aggressively at idle. Problem worsens in hot weather. Stalling during downshifting is particularly hazardous. Multiple NHTSA consumer complaints filed. Reportedly improved with ECU mapping adjustments in later production.
- Battery loses charge during extended standstill Battery depletes when the bike sits for extended periods. Components draw power even when ignition is off. On models with parking light position, the ignition switch can cause parasitic draw if moisture enters. Some owners report charging system issues linked to the regulator/rectifier.
- Instrument cluster LCD flickers, goes blank, or shows partial information LCD display develops flickering, blank sections, or complete failure. Causes include loose internal ribbon cable, water ingress, or corroded connector pins. Aftermarket replacement LCD modules available (same part 2014–2020 compatible).
- Pronounced clutch rattle at idle; potential inner plate failure Pronounced rattling noise from the clutch at idle in neutral. Noise disappears when clutch lever is pulled in. In severe cases, inner clutch plates can break or shatter. Contributing factor may be worn clutch basket. More pronounced on cold starts.
- Gear indicator fails to display correct gear (especially 5th/6th) The gear indicator in the LCD display fails to show the correct gear, particularly in 5th and 6th gear. The number flashes, disappears, or displays incorrect values. Root cause: dirty contacts on the gear position sensor. Cleaning is a temporary fix; sensor replacement (~40 USD) is the permanent solution. Yamaha developed a revised sensor.
- Poor surface finishes on fasteners and coolant pipes Widespread corrosion across peripheral components: radiator coolant pipes (chrome with thin lacquer, deteriorates rapidly from road spray), allen key bolt heads, brake line fittings, disc bobbins, gear lever linkage, rear sprocket, suspension linkage fasteners, and seat lock (seizes). Screw heads across the frame show rust. Weld slag not properly cleaned on some frames.
- Side stand safety switch causes unexpected engine cutout The bike starts normally in neutral but dies immediately when shifted into gear. Caused by the kickstand safety switch failing, corroding, or the starter cutoff relay malfunctioning. The switch connector is vulnerable to moisture ingress.
- Surface rust on steel swingarm The steel swingarm develops surface rust, particularly underneath the chain guard and near chain adjusters. Rust can appear within months of purchase, even without winter riding. The paint/coating is thin and easily damaged by chain debris. Weld seams and areas under the chain slider are most affected. Yamaha has replaced some swingarms under warranty.
690 Duke
- Clutch slave cylinder failure (recall) Recall 21V792000 On 2018-2019 models, the bellow-style clutch slave cylinder gasket can become damaged, leading to clutch inoperability and difficulty shifting. A recall (NHTSA 21V-792) was issued for replacement.
- Fuel tank leak at filler cap (recall) Recall 17V388000 On 2016-2017 models, fuel can leak from the filler cap area of the fuel tank, posing a fire risk. KTM issued a recall (NHTSA 17V-388) to address the affected filler-cap area.
- Premature rocker arm bearing wear Some owners report rocker arm bearing failure, leading to noisy top-end and potential engine damage. More frequent in earlier production; the 2016 update reportedly improved durability.
What they cost used
Both bikes priced used at the same age: 9 years old.
- MT-07
- about $5,700
- 690 Duke
- about $5,400
What they share
- Cooling
- Liquid-cooled
- Fuel capacity
- 3.7 US gal (14 L)
- Gearbox
- 6-speed
- Final drive
- Chain
- Front tire
- 120/70-17
Where the spec sheets split
| MT-07 | 690 Duke | |
|---|---|---|
| Seat height | 31.7 in (805 mm) | 32.9 in (835 mm) |
| Dry weight | 366 lb (166 kg) | 353 lb (160 kg) |
| MT-07 | 690 Duke | |
|---|---|---|
| Displacement | 689 cc | 690 cc |
| Engine | Parallel twin | Single-cylinder |
| Power | 75 hp (55 kW) | 73 hp (54 kW) |
| Torque | 50 lb-ft (68 Nm) | 55 lb-ft (74 Nm) |
| MT-07 | 690 Duke | |
|---|---|---|
| Fork | Telescopic | Upside-down (USD) |
| Front brake | 282 mm | 320 mm |
| Rear tire | 180/55-17 | 160/60-17 |
| Wheelbase | 55.1 in (1400 mm) | 57.7 in (1466 mm) |
What comes fitted, what costs extra
| MT-07 | 690 Duke | |
|---|---|---|
| ABS | Option | Standard |
| Traction Control | Not offered | Option |
| Ride Modes | Not offered | Option |
| Slipper Clutch | Not offered | Standard |
Head to head, area by area
Both bikes on the same scale, one area at a time.