By NastyNils·
Motorcycle comparison · Naked Bike vs Retro Classic
Yamaha MT-07 (RM04) vs XSR700 Legacy (MY2023)
Yamaha MT-07 vs XSR700 Legacy: two kinds of bike, and who each one is for.
You'll find the Yamaha MT-07 hasn't been softened one bit, and it's wild on every ride. The Yamaha XSR700 Legacy steers light and forgives sloppy lines.
What makes each one tick
MT-07
Stepping on the MT-07 feels like a big bike. Its crossplane twin thumps out a V-twin pulse, and there's strong pull from low revs the moment the throttle cracks open. It isn't watered down. Off the line, the front wheel lifts without drama.
XSR700 Legacy
The XSR700 Legacy's twin grunts hard from the bottom of the rev range. You sit upright and relaxed on a ribbed seat, and a bump in the pavement doesn't unsettle the chassis. The bar turns without a fight. Its exhaust's got a bark all its own.
The Voice of Experience
What actually separates them
- The MT-07 has the lower seat: 31.7 in (805 mm) vs 33.7 in (855 mm).
- The MT-07 has the lower wet weight: 401 lb (182 kg) vs 410 lb (186 kg).
- ABS: standard on the XSR700 Legacy, option on the MT-07.
Which one for the way you ride
Comfortable long-distance riding
Neither one fits
Neither one is built for long-haul comfort. For big miles, look at a proper tourer or sport tourer.
Don't look for a gap on commuting, twisty roads, running costs, and a first bike: there isn't one. Go by how each one fits you.
Who each one is built for
What's good, and what you'll live with
MT-07
Strengths
- Easy To Trust Quickly
- Cheap To Run
- Light, Friendly Controls
- Addictive CP2 engine character
- Accessible for all skill levels
Trade-offs
- Idle And Decel Cutouts
- Fragile 5th Gear
- Quick To Corrode
- Budget build quality
- Jerky throttle response at low RPM
XSR700 Legacy
What owners say
Strengths
- Torquey and characterful CP2 engine
Known problems to check before you buy
MT-07
- Intermittent engine cutout at idle and during deceleration The engine cuts out intermittently, especially when idling at traffic lights or decelerating to a stop. The ECU appears to reduce fuel supply too aggressively at idle. Problem worsens in hot weather. Stalling during downshifting is particularly hazardous. Multiple NHTSA consumer complaints filed. Reportedly improved with ECU mapping adjustments in later production.
- Battery loses charge during extended standstill Battery depletes when the bike sits for extended periods. Components draw power even when ignition is off. On models with parking light position, the ignition switch can cause parasitic draw if moisture enters. Some owners report charging system issues linked to the regulator/rectifier.
- Instrument cluster LCD flickers, goes blank, or shows partial information LCD display develops flickering, blank sections, or complete failure. Causes include loose internal ribbon cable, water ingress, or corroded connector pins. Aftermarket replacement LCD modules available (same part 2014–2020 compatible).
- Pronounced clutch rattle at idle; potential inner plate failure Pronounced rattling noise from the clutch at idle in neutral. Noise disappears when clutch lever is pulled in. In severe cases, inner clutch plates can break or shatter. Contributing factor may be worn clutch basket. More pronounced on cold starts.
- Gear indicator fails to display correct gear (especially 5th/6th) The gear indicator in the LCD display fails to show the correct gear, particularly in 5th and 6th gear. The number flashes, disappears, or displays incorrect values. Root cause: dirty contacts on the gear position sensor. Cleaning is a temporary fix; sensor replacement (~40 USD) is the permanent solution. Yamaha developed a revised sensor.
- Poor surface finishes on fasteners and coolant pipes Widespread corrosion across peripheral components: radiator coolant pipes (chrome with thin lacquer, deteriorates rapidly from road spray), allen key bolt heads, brake line fittings, disc bobbins, gear lever linkage, rear sprocket, suspension linkage fasteners, and seat lock (seizes). Screw heads across the frame show rust. Weld slag not properly cleaned on some frames.
- Side stand safety switch causes unexpected engine cutout The bike starts normally in neutral but dies immediately when shifted into gear. Caused by the kickstand safety switch failing, corroding, or the starter cutoff relay malfunctioning. The switch connector is vulnerable to moisture ingress.
- Surface rust on steel swingarm The steel swingarm develops surface rust, particularly underneath the chain guard and near chain adjusters. Rust can appear within months of purchase, even without winter riding. The paint/coating is thin and easily damaged by chain debris. Weld seams and areas under the chain slider are most affected. Yamaha has replaced some swingarms under warranty.
XSR700 Legacy
No confirmed faults on file yet. That's not the same as fault-free.
What they share
- Displacement
- 689 cc
- Engine
- Parallel twin
- Cooling
- Liquid-cooled
- Peak torque at
- 6,500 rpm
- Fuel capacity
- 3.7 US gal (14 L)
- Gearbox
- 6-speed
- Final drive
- Chain
- Fork
- Telescopic
- Front brake
- 282 mm
- Front tire
- 120/70-17
- Rear tire
- 180/55-17
Where the spec sheets split
| MT-07 | XSR700 Legacy | |
|---|---|---|
| Seat height | 31.7 in (805 mm) | 33.7 in (855 mm) |
| Wet weight | 401 lb (182 kg) | 410 lb (186 kg) |
| MT-07 | XSR700 Legacy | |
|---|---|---|
| Power | 75 hp (55 kW) | 73 hp (54 kW) |
| Peak power at | 9,000 rpm | 8,750 rpm |
| Torque | 50 lb-ft (68 Nm) | 49 lb-ft (67 Nm) |
| MT-07 | XSR700 Legacy | |
|---|---|---|
| Fuel economy | 53 mpg (US) / 4.4 L/100 km | 55 mpg (US) / 4.3 L/100 km |
| MT-07 | XSR700 Legacy | |
|---|---|---|
| Wheelbase | 55.1 in (1400 mm) | 55.3 in (1405 mm) |
What comes fitted, what costs extra
| MT-07 | XSR700 Legacy | |
|---|---|---|
| ABS | Option | Standard |
| LED Headlight | Not offered | Standard |
Head to head, area by area
Both bikes on the same scale, one area at a time.