By ·

Motorcycle comparison · Naked Bike

Aprilia SL 750 Shiver GT (MY2010) vs Triumph Street Triple 675 (MY2007)

Right at turn-in, the Aprilia SL 750 Shiver GT's stiff frame bites and it doesn't budge from the line you picked. The Triumph Street Triple 675 tips in the instant you touch the bars. The chassis swings around you while you're still asking.

Aprilia SL 750 Shiver GT (MY2010) and Triumph Street Triple 675 (MY2007) side by side
Aprilia SL 750 Shiver GT (MY2010) 2010–2013 · Italian V-Twin With Touring Manners Triumph Street Triple 675 (MY2007) 2007–2012 · Triple Soul, Razor Handling

So which one do you buy?

The Street Triple 675 has the edge if…

Sporty riding on twisty roads

Slight edge: Street Triple 675

The Street Triple 675 nudges ahead once the pavement starts to wiggle. What tips it: lighter steering and harder acceleration. Don't expect a night-and-day difference.

Daily commuting & city riding

Nose ahead: Street Triple 675

On the way to work, the Street Triple 675 asks a little less of you. Thank easier maneuvering in tight spots and a smaller footprint for that. Close enough that the test ride should settle it.

Which one's the smarter buy

Depends what you want it for

The price gap doesn't produce a clear winner. Neither bike is the clear better buy for the money.

What makes each one tick

SL 750 Shiver GT

Down low in the rev range, the Shiver GT's V-twin is already pulling clean, and there's a broad spread of torque behind it. The half-fairing keeps wind off. On the Twisted Sisters, the Sachs rear shock takes a mid-corner bump while the grippy aluminum chassis keeps both tires gripping. There's a V-twin growl waiting at every exit.

Nils rode the SL 750 Shiver GT in 2011 (NastyNils Testride).

Street Triple 675

Around a parking spot, the Street Triple moves like it weighs nothing, and that ease at walking pace means you'll reach for the key more often. A crack of the throttle brings in the triple's torque across a broad band of revs and reminds you what you're sitting on. The lever builds pressure steadily.

Nils rode the Street Triple 675 in 2007 and 2009 (NastyNils Testride).

The Voice of Experience

Portrait of NastyNils

What actually separates them

  • The Street Triple 675 has the lower wet weight: 401 lb (182 kg) vs 498 lb (226 kg).
  • The Street Triple 675 makes more peak power: 106 hp (79 kW) vs 95 hp (70 kW).
  • The SL 750 Shiver GT makes more peak torque: 58 lb-ft (79 Nm) vs 50 lb-ft (68 Nm).

See every difference ↓

Which one for the way you ride

Comfortable long-distance riding

Wrong job for both

Long-haul comfort is a weak spot for both. If you tour, shop with that in mind.

A confidence-building first motorcycle

Wrong tool: Street Triple 675

Too much motor for a beginner: the Street Triple 675 sits this one out.

Traveling with luggage

Not built for this

Neither is a natural luggage carrier, so a trip with bags means a compromise either way.

Who each one is built for

Texas Hill Country Weekend Rider

Texas Hill Country · Twisted Sisters · Circuit of The Americas

SoCal Canyon Performance Rider

Angeles Crest Highway · Coronado Trail Scenic Byway · Big Sur Coast Highway

Appalachian Technical Corner Rider

Back of the Dragon · Blue Ridge Parkway · Cherohala Skyway

What's good, and what you'll live with

SL 750 Shiver GT

What owners say

Strengths

  • Strong, characterful V-twin engine
  • Confident, sporty handling
  • Premium componentry and technology
  • Good value and Italian exclusivity

Trade-offs

  • Snatchy throttle response at low speeds

Street Triple 675

Strengths

  • Torque That Arrives In Waves
  • An Exotic For The Money
  • Fit Tuned For Smaller Riders
  • A Triple Voice With Real Character
  • Light, precise handling

Trade-offs

  • Wet-Weather Tire Risk
  • Rear Linkage Bearings Seize
  • Fuel Tank Coating Flakes
  • Stock mirrors vibrate at highway speeds
  • No ABS across entire generation

Known problems to check before you buy

SL 750 Shiver GT

No confirmed faults on file yet. That's not the same as fault-free.

Street Triple 675

  • Stator winding insulation breakdown The stator can fail through heat-driven breakdown of winding insulation. Failure often co-occurs with regulator/rectifier failure: an unregulated R/R can cook the stator through prolonged voltage abuse. Symptoms are loss of charging, occasionally accompanied by visibly burned windings or a melted connector between stator and R/R.
  • Needle roller bearings in rear linkage seize from inadequate grease intervals The needle roller bearings in the rear suspension linkage corrode and seize because the factory-recommended grease interval (12,000 mi (20,000 km)) is too long for typical use, particularly in salt-belt regions where bearings can be destroyed before scheduled service. Multiple sources additionally report that the Base model's rear shock damping degrades noticeably between 10,000 and 20,000 mi.
  • Auto cam chain tensioner spring weakening The factory automatic cam chain tensioner uses a spring that weakens over time, allowing the cam chain to slacken. Symptoms include cold-start rattle progressing to rattle at idle and low RPM in all gears. In severe neglected cases, the chain can deposit aluminium filings in the cases or, in worst-case scenarios, fail catastrophically. The platform-shared issue is well documented across both the Street Triple 675 and its Daytona 675 sibling. Triumph subsequently moved to a hydraulic tensioner design on later platforms.
  • Closed-throttle to part-throttle stumble at low RPM A bog or stumble in the 4,000–6,000 rpm range when transitioning from closed throttle to small openings. Causes attributed across owner discussions include throttle position sensor calibration drift, idle stepper (ISCV) carbon buildup and throttle body fouling. The issue is commonly mitigated by ECU re-mapping (TuneECU community).
  • Inner tank coating bubbling and flaking The internal coating of the fuel tank can bubble and flake, with fragments entering the fuel pump filter and lines. Symptoms include stumbling, stalling, hard starting and backfire. Triumph has acknowledged the issue under warranty in some markets.
  • Two-piston Nissin sliding-pin front caliper seizure The Base model's front caliper sliders seize from corrosion, leading to uneven pad wear, spongy lever feel and accelerated disc wear. Particularly common in damp climates. The R variant uses different (Daytona-spec radial-mount four-piston) calipers and is not affected by this specific failure mode.
  • Factory coolant hose clamps leak prematurely Several factory coolant hose clamps are reported as under-torqued or poorly positioned at assembly, with hose 22 (between engine and radiator, per Triumph parts diagrams) most commonly cited. Coolant weeping or dripping near the mid-engine is sometimes observed within the first 500–1,200 miles.
  • Speedometer reads approximately 8% high The speedometer reads optimistically, showing a higher speed than the bike is actually traveling, and the gap widens as the indicated speed rises. The over-read stays on the legally permitted side, since a speedometer is not allowed to under-read. The odometer also runs slightly high, though by a smaller margin.
  • Matt-finish engine case paint bubbling, peeling and corroding The matt powder-coated engine cases show bubbling, cracking and peeling due to inadequate factory surface preparation. Underlying corrosion forms, progressing if untreated. The issue is widely cited across both Street Triple 675 and Daytona 675 first-generation owner communities.
  • Headlight lens cracking on the final-year angular units The plastic lenses of the angular twin headlights fitted to the final model year of this generation can crack without any impact damage, with fine cracks spreading across the lens over time. The earlier round headlights are not part of this pattern. Triumph answered with a dealer service bulletin rather than a safety recall, and owners report cracked units being replaced free of charge with a revised, tougher part.

What they cost used

These prices compare a 14-year-old SL 750 Shiver GT with a 14-year-old Street Triple 675.

SL 750 Shiver GT
about $4,100
Street Triple 675
about $4,700

At 14 years old, the Aprilia SL 750 Shiver GT sits around $4,100 while the Triumph Street Triple 675 runs about $4,700. That's a $600 gap in the Shiver GT's favor. These are US market estimates, not live listings.

What they share

Cooling
Liquid-cooled
Gearbox
6-speed
Final drive
Chain
Fork
Upside-down (USD)
Front tire
120/70-17
Rear tire
180/55-17

Where the spec sheets split

Seat height and weight
SL 750 Shiver GT Street Triple 675
Seat height 31.3 in (795 mm) 31.5 in (800 mm)
Wet weight 498 lb (226 kg) 401 lb (182 kg)
Engine, power and torque
SL 750 Shiver GT Street Triple 675
Displacement 750 cc 675 cc
Engine 90° V-twin Inline-three
Power 95 hp (70 kW) 106 hp (79 kW)
Peak power at 9,000 rpm 11,750 rpm
Torque 58 lb-ft (79 Nm) 50 lb-ft (68 Nm)
Peak torque at 7,250 rpm 9,100 rpm
Top speed 130 mph (209 km/h) 143 mph (230 km/h)
Fuel economy and tank capacity
SL 750 Shiver GT Street Triple 675
Fuel economy 33 mpg (US) / 7.06 L/100 km 46 mpg (US) / 5.1 L/100 km
Fuel capacity 4.0 US gal (15 L) 4.6 US gal (17.4 L)
Other specifications
SL 750 Shiver GT Street Triple 675
Front brake 320 mm 308 mm

What comes fitted, what costs extra

SL 750 Shiver GT Street Triple 675
ABS Option Not offered
Ride Modes Standard Not offered

Head to head, area by area

Both bikes on the same scale, one area at a time.

Braking

Engine

Handling

Suspension

Comfort

Reliability

Practicality

Sporting Capability

Usability

Specs and equipment as of November 6, 2026. The riding calls use the same ratings behind both buyer's guides.