By NastyNils·
Motorcycle comparison · Supersport vs Naked Bike
Triumph Daytona 675 (D67LC2-R) vs Street Triple 675 (MY2007)
Triumph Daytona 675 vs Street Triple 675: two kinds of bike, and who each one is for.
Tip the Triumph Daytona 675 into a quick bend and the frame's settled, yet it's still eager to tighten your line. On the Triumph Street Triple 675, the bars don't need more than a nudge before the steering snaps over. The whole bike swivels beneath you, moped-light.
So which one do you buy?
Buy the Street Triple 675 if…
Daily commuting & city riding
Clear winner: Street Triple 675
The Street Triple 675 suits a daily commute clearly better. In traffic, it's simply less work.
The Daytona 675 has the edge if…
Sporty riding on twisty roads
Narrow edge: Daytona 675
The Daytona 675 is a touch more fun when the road starts bending. Put it down to better suspension and a sportier chassis.
What makes each one tick
Daytona 675
Through a fast sweeper, the Daytona's aluminum frame holds its shape while the Öhlins fork keeps reading the pavement. Bumps don't upset it. The triple doesn't wait for revs: any throttle opening brings a solid shove. The triple's howl keeps climbing right up to the shift.
Street Triple 675
At idle, the Street Triple's exhaust already has a three-cylinder growl going, and it's still there with the throttle wide open or rolled shut. Through the tight hairpins of Angeles Crest Highway, corner entry doesn't take more than one push on the grip before the chassis rotates around and holds its arc. The exits come clean. Its key comes off the hook more often.
Nils rode the Street Triple 675 in 2007 and 2009 (NastyNils Testride).
The Voice of Experience
What actually separates them
- The Street Triple 675 has the lower seat: 31.5 in (800 mm) vs 32.7 in (831 mm).
- The Daytona 675 makes more peak power: 126 hp (94 kW) vs 106 hp (79 kW).
- The Daytona 675 makes more peak torque: 53 lb-ft (72 Nm) vs 50 lb-ft (68 Nm).
Which one for the way you ride
Comfortable long-distance riding
Not their thing
Neither of these is a mile-muncher. If big days are the plan, keep looking.
A confidence-building first motorcycle
Wrong job for both
Neither one is where you should learn. Get a season on something gentler first.
Traveling with luggage
Look elsewhere
Loading up for a long trip isn't a strength of either bike. Expect to compromise on what you bring.
Who each one is built for
What's good, and what you'll live with
Daytona 675
What owners say
Strengths
- Exceptional triple engine character
- Superb handling and cornering confidence
- Plush, high-spec Öhlins suspension
- Powerful and precise Brembo brakes
Trade-offs
- Regulator/rectifier prone to failure
Street Triple 675
Strengths
- Torque That Arrives In Waves
- An Exotic For The Money
- Fit Tuned For Smaller Riders
- A Triple Voice With Real Character
- Light, precise handling
Trade-offs
- Wet-Weather Tire Risk
- Rear Linkage Bearings Seize
- Fuel Tank Coating Flakes
- Stock mirrors vibrate at highway speeds
- No ABS across entire generation
Known problems to check before you buy
Daytona 675
- Regulator/rectifier failure The regulator/rectifier can overheat and fail, leading to charging system issues and potentially damaging the battery and ECU. Many owners replace it proactively with a MOSFET unit or relocate it for better cooling.
- Oil/water heat exchanger failure The oil cooler (heat exchanger) can develop internal leaks, allowing coolant and oil to mix.
- Auto cam chain tensioner spring weakening The factory automatic cam chain tensioner uses a spring that weakens over time, allowing the cam chain to slacken. Symptoms include cold-start rattle progressing to rattle at idle and low RPM in all gears. In severe neglected cases, the chain can deposit aluminium filings in the cases or, in worst-case scenarios, fail catastrophically. The platform-shared issue is well documented across both the Street Triple 675 and its Daytona 675 sibling. Triumph subsequently moved to a hydraulic tensioner design on later platforms.
- Matt-finish engine case paint bubbling, peeling and corroding The matt powder-coated engine cases show bubbling, cracking and peeling due to inadequate factory surface preparation. Underlying corrosion forms, progressing if untreated. The issue is widely cited across both Street Triple 675 and Daytona 675 first-generation owner communities.
Street Triple 675
- Stator winding insulation breakdown The stator can fail through heat-driven breakdown of winding insulation. Failure often co-occurs with regulator/rectifier failure: an unregulated R/R can cook the stator through prolonged voltage abuse. Symptoms are loss of charging, occasionally accompanied by visibly burned windings or a melted connector between stator and R/R.
- Needle roller bearings in rear linkage seize from inadequate grease intervals The needle roller bearings in the rear suspension linkage corrode and seize because the factory-recommended grease interval (12,000 mi (20,000 km)) is too long for typical use, particularly in salt-belt regions where bearings can be destroyed before scheduled service. Multiple sources additionally report that the Base model's rear shock damping degrades noticeably between 10,000 and 20,000 mi.
- Auto cam chain tensioner spring weakening The factory automatic cam chain tensioner uses a spring that weakens over time, allowing the cam chain to slacken. Symptoms include cold-start rattle progressing to rattle at idle and low RPM in all gears. In severe neglected cases, the chain can deposit aluminium filings in the cases or, in worst-case scenarios, fail catastrophically. The platform-shared issue is well documented across both the Street Triple 675 and its Daytona 675 sibling. Triumph subsequently moved to a hydraulic tensioner design on later platforms.
- Closed-throttle to part-throttle stumble at low RPM A bog or stumble in the 4,000–6,000 rpm range when transitioning from closed throttle to small openings. Causes attributed across owner discussions include throttle position sensor calibration drift, idle stepper (ISCV) carbon buildup and throttle body fouling. The issue is commonly mitigated by ECU re-mapping (TuneECU community).
- Inner tank coating bubbling and flaking The internal coating of the fuel tank can bubble and flake, with fragments entering the fuel pump filter and lines. Symptoms include stumbling, stalling, hard starting and backfire. Triumph has acknowledged the issue under warranty in some markets.
- Two-piston Nissin sliding-pin front caliper seizure The Base model's front caliper sliders seize from corrosion, leading to uneven pad wear, spongy lever feel and accelerated disc wear. Particularly common in damp climates. The R variant uses different (Daytona-spec radial-mount four-piston) calipers and is not affected by this specific failure mode.
- Factory coolant hose clamps leak prematurely Several factory coolant hose clamps are reported as under-torqued or poorly positioned at assembly, with hose 22 (between engine and radiator, per Triumph parts diagrams) most commonly cited. Coolant weeping or dripping near the mid-engine is sometimes observed within the first 500–1,200 miles.
- Speedometer reads approximately 8% high The speedometer reads optimistically, showing a higher speed than the bike is actually traveling, and the gap widens as the indicated speed rises. The over-read stays on the legally permitted side, since a speedometer is not allowed to under-read. The odometer also runs slightly high, though by a smaller margin.
- Matt-finish engine case paint bubbling, peeling and corroding The matt powder-coated engine cases show bubbling, cracking and peeling due to inadequate factory surface preparation. Underlying corrosion forms, progressing if untreated. The issue is widely cited across both Street Triple 675 and Daytona 675 first-generation owner communities.
- Headlight lens cracking on the final-year angular units The plastic lenses of the angular twin headlights fitted to the final model year of this generation can crack without any impact damage, with fine cracks spreading across the lens over time. The earlier round headlights are not part of this pattern. Triumph answered with a dealer service bulletin rather than a safety recall, and owners report cracked units being replaced free of charge with a revised, tougher part.
What they cost used
These prices compare a 14-year-old Daytona 675 with a 14-year-old Street Triple 675.
- Daytona 675
- about $6,200
- Street Triple 675
- about $4,700
At 14 years old, the Triumph Daytona 675 sits around $6,200 while the Triumph Street Triple 675 lands near $4,700. That's a $1,500 gap in the Street Triple 675's favor. These are estimates from the used market, not live listings.
What they share
- Displacement
- 675 cc
- Engine
- Inline-three
- Cooling
- Liquid-cooled
- Fuel capacity
- 4.6 US gal (17.4 L)
- Gearbox
- 6-speed
- Final drive
- Chain
- Fork
- Upside-down (USD)
- Front brake
- 308 mm
- Front tire
- 120/70-17
- Rear tire
- 180/55-17
Where the spec sheets split
| Daytona 675 | Street Triple 675 | |
|---|---|---|
| Seat height | 32.7 in (831 mm) | 31.5 in (800 mm) |
| Wet weight | 407 lb (185 kg) | 401 lb (182 kg) |
| Daytona 675 | Street Triple 675 | |
|---|---|---|
| Power | 126 hp (94 kW) | 106 hp (79 kW) |
| Peak power at | 12,600 rpm | 11,750 rpm |
| Torque | 53 lb-ft (72 Nm) | 50 lb-ft (68 Nm) |
| Top speed | 156 mph (251 km/h) | 143 mph (230 km/h) |
| Daytona 675 | Street Triple 675 | |
|---|---|---|
| Fuel economy | 32 mpg (US) / 7.24 L/100 km | 46 mpg (US) / 5.1 L/100 km |
| Daytona 675 | Street Triple 675 | |
|---|---|---|
| Wheelbase | 54.9 in (1394 mm) | 55.5 in (1410 mm) |
What comes fitted, what costs extra
| Daytona 675 | Street Triple 675 | |
|---|---|---|
| Manually Adjustable Front Suspension | Standard | Not offered |
| Steering Damper | Standard | Not offered |
| Quickshifter | Standard | Not offered |
Head to head, area by area
Both bikes on the same scale, one area at a time.