By ·

Motorcycle comparison · Supersport

BMW S 1000 RR (K46) vs KTM 1190 RC8 R (MY2010)

BMW S 1000 RR vs KTM 1190 RC8 R: which one to buy for the riding you do.

On a wet, dusty climb, the BMW S 1000 RR's electronics catch every slip under throttle so quietly you'll barely notice them. The KTM 1190 RC8 R's twin keeps hauling through every gear.

BMW S 1000 RR (K46) and KTM 1190 RC8 R (MY2010) side by side
BMW S 1000 RR (K46) 2009–2018 · The Top-End That Won't Quit KTM 1190 RC8 R (MY2010) 2010–2011 · Orange Precision With A Bite

So which one do you buy?

Which one's the smarter buy

Even on value

At these used prices, neither bike is the clear better buy for the money.

What makes each one tick

S 1000 RR

Up near the redline, the S 1000 RR's four-cylinder finds its hardest shove. At corner entry the bar turns it in neutrally, and there's no tug-of-war at the front. Through the long sweepers at WeatherTech Raceway Laguna Seca, the chassis holds its lean while you stay on the gas.

Nils rode the S 1000 RR in Portugal in 2009, in Andalusia, Austria, Slovakia, and the Czech Republic in 2010, in Andalusia, Hungary, Slovakia, and the Eifel in 2011, in Andalusia and Spain in 2012, in 2014, in Andalusia in 2015, in Oman & UAE in 2016, and in Qatar in 2017 (NastyNils Testride).

1190 RC8 R

Pressed hard through a rising, rippled corner, the RC8 R's chassis pins you down and swings you around like a banked coaster. A ripple mid-corner barely moves the WP fork, and it's still holding firm on the last lap. There's real room behind the bars. The brakes bite as hard at day's end.

Nils rode the 1190 RC8 R in 2010, and in Andalusia in 2011 (NastyNils Testride).

The Voice of Experience

Portrait of NastyNils

What actually separates them

  • The S 1000 RR makes more peak power: 199 hp (146 kW) vs 169 hp (124 kW).
  • The 1190 RC8 R makes more peak torque: 91 lb-ft (123 Nm) vs 83 lb-ft (113 Nm).
  • The 1190 RC8 R has the larger engine: 1195 cc vs 999 cc.

See every difference ↓

Which one for the way you ride

A confidence-building first motorcycle

Not built for this

A first bike should forgive mistakes, and these two don't do that well enough. Come back to them later.

There's no real gap on track days, commuting, twisty roads, and running costs. Sit on both and let fit and price decide.

Who each one is built for

US Trackday & Apex Hunter

Barber Motorsports Park · WeatherTech Raceway Laguna Seca · Circuit of The Americas

SoCal Canyon Performance Rider

Angeles Crest Highway · Coronado Trail Scenic Byway · Big Sur Coast Highway

Appalachian Technical Corner Rider

Back of the Dragon · Blue Ridge Parkway · Cherohala Skyway

What's good, and what you'll live with

S 1000 RR

Strengths

  • Top End Never Signs Off
  • Traction Control That Trims
  • Clutchless In Both Directions
  • Planted In Fast Sweepers
  • Class-leading peak power

Trade-offs

  • It Does Not Flick
  • Thin Below The Power Band
  • City Riding Is Work
  • Brake Lever Point Migrates
  • Snatchy throttle response (2010–2011)

1190 RC8 R

Strengths

  • Notably Light For Its Class
  • Constant Front-End Feedback
  • Least-Punishing Supersport Cockpit
  • Holds Pace All Day
  • Strong, character-rich V-twin mid-range

Trade-offs

  • Fussy At Low RPM
  • Stiff Even At Softest
  • Heavy Clutch Pull
  • Significant engine heat to the rider
  • Firm, narrow seat limits long-distance use

Known problems to check before you buy

S 1000 RR

  • Fuel pump flange may crack and leak fuel Recall 20V471000 The pneumatic fastening tool used at the fuel-pump supplier introduced stress at the pump flange during assembly. Over time, cracks can propagate at the flange and fuel can leak — fire risk in the presence of an ignition source. The recall covers MY2010–MY2011 S 1000 RR within a much larger 50,184-unit BMW two-wheel campaign that also covered other BMW Motorrad models. Remedy: dealer reinforces the flange with a support ring or replaces the fuel pump. A follow-up campaign (NHTSA 20V471) replaces fuel pumps that received only the support-ring repair under 13V617.
  • Sachs suspension underdamped for spirited / track use (especially 2010) The 2010 Sachs front fork is widely judged underdamped for spirited or track use; damping was improved in 2011 within the same generation. Cartridge re-valving is non-trivial because Sachs uses non-standard shim sizes — most track riders fit aftermarket cartridge kits. The Sachs rear shock is not user-rebuildable, and seal leaks have been reported.
  • Quickshifter intermittent or inoperative — wiring/connector at shift sensor Quickshifter stops working intermittently or completely. Documented root cause is most often the wiring or connector at the shift-sensor side rather than the sensor itself; BMW issued a service measure on the shift sensor. Some dealers misdiagnose and replace the sensor unnecessarily before fixing the wiring.
  • Balance-pipe / exhaust valve servomotor failure On MY2015–2016 K46 bikes (and some MY2017–2018), the balance-pipe valve servomotor bushing wears, the actuating cables can break, or the servo can seize in the activated position. Symptom: loud clicking on ignition, fault code, valve stuck open or closed. BMW has replaced full header systems under warranty in some documented cases. Aftermarket "servo eliminator" devices (HealTech, Servo Buddy) are common workarounds.
  • DDC dashboard error / calibration failure On MY2015–2018 K46 bikes optioned with DDC (Dynamic Damping Control), a "DDC!" dashboard warning or calibration failure can appear. Documented root causes include corroded or loose battery terminals, CAN-bus faults, and rear travel sensor displacement. Often resolves with re-calibration or wiring fix; in some cases the DDC shock has been replaced under warranty.
  • Brake judder / pulsing at the lever, mostly under track / hard road use Brake judder reported at the lever after hard use. Community consensus is that the cause is most often uneven pad-material deposit on the stock rotors (rather than true disc warpage), with stock pads judged inadequate for sustained track use. Common owner fix: switch to higher-spec pads (e.g., Brembo Z04) or upgraded discs.
  • Cam chain rattle at cold start (cam chain tensioner spring pressure) Loud cam chain rattle, particularly on cold start. BMW issued a service measure that replaces the original BLACK screw plug at the cam chain tensioner with a longer SILVER screw plug to increase tensioner spring pressure. The fix is applied only after approximately 9,300 mi (15,000 km) and only when the symptom is documented. Some owners switch to aftermarket manual cam chain tensioners (e.g., Alpha Racing) for track use. No engine failures attributed to the rattle in documented sources.
  • Vibration through tank, handlebars and pegs above 6,000 rpm Distinct vibration through tank, bars, footpegs and mirrors, intensifying past approximately 10,000 rpm. The K46 inline-four has no secondary balancer. Mirrors can blur at sustained high revs.
  • Aluminium frame transfers significant heat to rider's inner legs The aluminium twin-spar frame (used as a load-bearing element with the engine inclined into it) transfers significant engine and exhaust heat to the rider's inner legs, particularly in low-speed traffic and warm weather. Documented across all K46 model years. Common owner-installed mitigation: aftermarket carbon frame covers (e.g., Ilmberger).

1190 RC8 R

  • Hydraulic clutch slave cylinder seal failure The clutch slave cylinder seal can degrade and weep fluid, causing a soft lever and eventual clutch disengagement issues; replacement of the slave-cylinder assembly is the common fix.
  • Fuel pump reliability Owners report intermittent in-tank fuel pump failures presenting as hard starting, low-rpm cutting out or pump electrical-noise complaints; replacement under warranty is typical when caught early.
  • Regulator/rectifier heat-related failure The voltage regulator/rectifier is known to overheat and fail on early RC8 R units, leading to charging-system warning lights and eventual battery drain; uprated aftermarket units are a common owner remedy.
  • Cam chain tensioner noise on cold start Some owners report audible rattle from the cam chain tensioner area on cold start, usually traced to the hydraulic tensioner; updated parts are available from KTM dealers.
  • Rear shock linkage bearing wear The rear linkage bearings can develop play if servicing intervals are missed, manifesting as a clunk over bumps and degraded rear damping; preventive regreasing every ~9,321 mi (15,000 km) is widely recommended.

What they cost used

These prices compare a 15-year-old S 1000 RR with a 15-year-old 1190 RC8 R.

S 1000 RR
about $9,700
1190 RC8 R
about $9,400

What they share

Cooling
Liquid-cooled
Gearbox
6-speed
Final drive
Chain
Front brake
320 mm

Where the spec sheets split

Seat height and weight
S 1000 RR 1190 RC8 R
Seat height 32.1 in (815 mm) 31.7 in (805 mm)
Engine, power and torque
S 1000 RR 1190 RC8 R
Displacement 999 cc 1195 cc
Engine Inline-four 75° V-twin
Power 199 hp (146 kW) 169 hp (124 kW)
Peak power at 13,500 rpm 10,000 rpm
Torque 83 lb-ft (113 Nm) 91 lb-ft (123 Nm)
Peak torque at 10,500 rpm 8,000 rpm
Top speed 186 mph (299 km/h) 174 mph (280 km/h)
Fuel economy and tank capacity
S 1000 RR 1190 RC8 R
Fuel economy 37 mpg (US) / 6.4 L/100 km 36 mpg (US) / 6.5 L/100 km
Fuel capacity 4.6 US gal (17.5 L) 4.4 US gal (16.5 L)
Other specifications
S 1000 RR 1190 RC8 R
Front tire 120/70 ZR17 120/70-17
Rear tire 190/55 ZR17 190/55-17
Wheelbase 56.1 in (1425 mm) 56.3 in (1430 mm)

What comes fitted, what costs extra

S 1000 RR 1190 RC8 R
Traction Control Standard Not offered
Ride Modes Standard Not offered
Wheelie Control Option Not offered
Launch Control Option Not offered
Quickshifter Option Not offered
Slipper Clutch Standard Not offered

Head to head, area by area

Both bikes on the same scale, one area at a time.

Braking

Engine

Handling

Suspension

Comfort

Reliability

Practicality

Sporting Capability

Usability

Specs and equipment as of November 6, 2026. The riding calls use the same ratings behind both buyer's guides.