By ·

Motorcycle comparison · Supermoto vs Naked Bike

Ducati Hypermotard 698 Mono (MY2024) vs KTM 890 Duke R (MY2020)

Ducati Hypermotard 698 Mono vs KTM 890 Duke R: which one's easier to live with every day.

You'll feel the Ducati Hypermotard 698 Mono's single smooth out and settle as you wind it toward the top of its rev range. The KTM 890 Duke R's twin wants the throttle pinned.

Ducati Hypermotard 698 Mono (MY2024) and KTM 890 Duke R (MY2020) side by side
Ducati Hypermotard 698 Mono (MY2024) 2024 · One Cylinder, Pure Corner KTM 890 Duke R (MY2020) 2020–2024 · Sharp Enough To Draw Blood

So which one do you buy?

The Hypermotard 698 Mono has the edge if…

Daily commuting & city riding

A touch ahead: Hypermotard 698 Mono

For the Monday-to-Friday grind, the Hypermotard 698 Mono pulls a nose in front. It's down to lower running costs. Your own commute could easily flip it.

Which one's the smarter buy

Apples and oranges

These bikes sit in different classes, so there's no clear better buy for the money. The choice comes down to what you want the bike to do, not just the sticker price.

What makes each one tick

Hypermotard 698 Mono

Changing direction on the Hypermotard doesn't take more than a push on its wide motard bar, and the short wheelbase flicks it from one lean to the next. There's no guessing over a bump: the Marzocchi fork reports exactly how much load the front tire carries. The Brembo caliper bites hard.

890 Duke R

The Duke folds into a turn with little effort at the bar and holds a neutral line through the middle. There's more bite behind the brake lever than the upright seat lets you use at first. The chassis holds its exit line.

Nils rode the 890 Duke R in Austria and Hungary in 2020, and in 2021 (NastyNils Testride).

The Voice of Experience

Portrait of NastyNils

What actually separates them

  • The 890 Duke R has the lower seat: 32.8 in (834 mm) vs 35.6 in (904 mm).
  • The 890 Duke R makes more peak power: 121 hp (89 kW) vs 77 hp (57 kW).
  • The 890 Duke R makes more peak torque: 73 lb-ft (99 Nm) vs 46 lb-ft (63 Nm).

See every difference ↓

Which one for the way you ride

A confidence-building first motorcycle

Off its turf: 890 Duke R

No first-bike verdict for the 890 Duke R. It's a step up for later.

They come out level on twisty roads. The better-kept used example is the smarter money.

Who each one is built for

SoCal Canyon Performance Rider

Angeles Crest Highway · Coronado Trail Scenic Byway · Big Sur Coast Highway

Bay Area Ridge Road Social Rider

Skyline Boulevard · San Francisco Bay Area · Big Sur Coast Highway

Appalachian Technical Corner Rider

Back of the Dragon · Blue Ridge Parkway · Cherohala Skyway

What's good, and what you'll live with

Hypermotard 698 Mono

What owners say

Strengths

  • Class-leading electronics package
  • Front brake feel and stopping power
  • Razor-sharp handling at low weight
  • Smoothness for a big single (above the powerband)
  • Distinctive sound character

Trade-offs

  • Tall seat height excludes shorter riders
  • Dated and small instrument display for the price
  • Heat on rider's right leg in stop-and-go
  • Rough fuelling below 5,000 rpm in low gears

890 Duke R

Strengths

  • Turn-in reads your mind
  • Superbike brakes, featherweight bike
  • Midrange that shoves
  • Electronics that enable
  • Genuinely competitive on track

Trade-offs

  • Built for sport, not comfort
  • Bars buzz at highway pace
  • Top end runs dry early
  • Quickshifter stiffened under load
  • Excessive heat radiation in slow traffic

Known problems to check before you buy

Hypermotard 698 Mono

  • Assembly oversights on early-production bikes Multiple owner reports of small assembly misses on early MY2024 deliveries: (a) shipping plug left in the gas tank vent hose causing tank pressurisation on hot days, (b) gear shifter binding requiring a spacer washer, (c) rear seat alignment problems with bolt holes, (d) miscellaneous minor finish issues. Reportedly tapering off through 2025. Not a single root cause — a pattern of QC inconsistency on early production.
  • Rough / surging fuelling below ~5,000 rpm in 1st and 2nd gear Owners and reviewers consistently report rough, surging, occasionally hesitant low-throttle behaviour in 1st and 2nd gear below approximately 5,000 rpm. Caused by Euro-5-driven lean low-load mapping combined with the low crank inertia. Above approximately 6,000 rpm the engine pulls cleanly. Closed-loop O2 feedback exacerbates the lean condition. Aftermarket workarounds (BoosterPlug, Shift-Tech "Quick Fuel Fix") are commonly discussed in owner forums.
  • Heat on right leg in slow-moving traffic The 13.1:1 compression single combined with twin under-tail exhaust outlets close to the rider produces noticeable heat on the right leg / inner thigh in slow-moving traffic on warm days. Inherent to the layout, not a fault.
  • Vibration below ~4,000 rpm under load Despite twin counterbalance shafts, reviewers report the single shudders noticeably below approximately 4,000 rpm under load. Above approximately 5,500 rpm vibration is well-managed; bar buzziness is reported between 3,000–5,500 rpm at sustained motorway speed. Inherent to engine architecture, not a fault.

890 Duke R

  • OEM front brake disc warping / pulsing Front brake rotors (Galfer OEM discs) warping, causing pulsing/juddering when braking. Some owners report discs warped from factory. Replaced under warranty in many cases. Some owners switch to aftermarket discs (e.g., MetalGear) with better results. The issue concerns the Galfer discs, not the Brembo Stylema calipers themselves.
  • Valve cover gasket oil weep Slow oil seepage occurs from the valve cover gasket, particularly at the half-moon sections. The weeping is most evident during high operating temperatures or after spirited riding.
  • Countershaft sprocket seal oil seep Oil leaks from behind the front sprocket cover on the left side, originating from the countershaft seal. Symptoms range from minor seeping to dripping that can reach the drive chain and rear tire.
  • Thermostat housing / coolant system seep Coolant seeps or leaks from the plastic thermostat housing or the hose connections at the cylinder head water fitting, typically caused by narrow original hose clamps, a fragile plastic housing, or improperly sealed cooling hoses.

What they cost used

These prices compare a 2-year-old Hypermotard 698 Mono with a 2-year-old 890 Duke R.

Hypermotard 698 Mono
about $11,000
890 Duke R
about $8,600

At two years old, the Ducati Hypermotard 698 Mono sits around $11,000 while the KTM 890 Duke R lands near $8,600. That's a $2,400 gap in the KTM's favor. These are US market estimates, not live listings.

What they share

Cooling
Liquid-cooled
Gearbox
6-speed
Final drive
Chain
Fork
Upside-down (USD)
Front tire
120/70-17

Where the spec sheets split

Seat height and weight
Hypermotard 698 Mono 890 Duke R
Seat height 35.6 in (904 mm) 32.8 in (834 mm)
Dry weight 333 lb (151 kg) 366 lb (166 kg)
Engine, power and torque
Hypermotard 698 Mono 890 Duke R
Displacement 659 cc 889 cc
Engine Single-cylinder Parallel twin
Power 77 hp (57 kW) 121 hp (89 kW)
Peak power at 9,750 rpm 9,250 rpm
Torque 46 lb-ft (63 Nm) 73 lb-ft (99 Nm)
Peak torque at 8,000 rpm 7,750 rpm
Fuel economy and tank capacity
Hypermotard 698 Mono 890 Duke R
Fuel economy 49 mpg (US) / 4.8 L/100 km 50 mpg (US) / 4.74 L/100 km
Fuel capacity 3.2 US gal (12 L) 3.7 US gal (14 L)
Other specifications
Hypermotard 698 Mono 890 Duke R
Front brake 330 mm 320 mm
Rear tire 160/60-17 180/55-17
Wheelbase 56.8 in (1443 mm) 58.3 in (1482 mm)
Front travel 8.5 in (215 mm) 5.5 in (140 mm)
Rear travel 9.4 in (240 mm) 5.9 in (150 mm)

What comes fitted, what costs extra

Hypermotard 698 Mono 890 Duke R
TFT Display Not offered Standard
Smartphone Connectivity Not offered Option
USB Charging Port Not offered Option

Head to head, area by area

Both bikes on the same scale, one area at a time.

Braking

Engine

Handling

Suspension

Comfort

Reliability

Practicality

Sporting Capability

Usability

Specs and equipment as of November 6, 2026. The riding calls use the same ratings behind both buyer's guides.