By NastyNils·
Motorcycle comparison · Retro Classic
Kawasaki Z 900 RS (MY2018) vs Z900 RS Black Ball Edition (MY2026)
Kawasaki Z 900 RS vs Z900 RS Black Ball Edition: buy with your heart, but read this first.
Into the first quick bend after the swap, the Kawasaki Z 900 RS hustles, and it's happy running with far angrier-looking hardware. The Kawasaki Z900 RS Black Ball Edition's compliant suspension doesn't rush the bend. Its chassis just settles in and stays planted.
What makes each one tick
Z 900 RS
Up on the Z 900 RS you're sitting tall, yet you're free to shift your weight and work the wide bars. The front end keeps talking at corner entry, and it doesn't fold as the pace builds. Even two-up at night on a narrow road littered with loose rock, it's still steerable. The bars still answer when it's dark.
Nils rode the Z 900 RS in Styria and Switzerland in 2018, and in Austria and Montenegro in 2024 (NastyNils Testride).
Z900 RS Black Ball Edition
Throttle and steering on the Z900 RS Black Ball Edition answer at a measured pace that's easy to read ahead. A bump doesn't kick up through the padded seat. The springs just give. Up top, its pipe rumbles like a classic single-collector header.
The Voice of Experience
What actually separates them
- Ride Modes: standard on the Z900 RS Black Ball Edition, not offered on the Z 900 RS.
- Cruise Control: standard on the Z900 RS Black Ball Edition, not offered on the Z 900 RS.
- Smartphone Connectivity: standard on the Z900 RS Black Ball Edition, not offered on the Z 900 RS.
Which one for the way you ride
A confidence-building first motorcycle
Both fall short
A first bike should forgive mistakes, and these two don't do that well enough. Come back to them later.
On character, commuting, twisty roads, and running costs, these two are a wash. That's where your budget and your inseam get the final say.
Who each one is built for
What's good, and what you'll live with
Z 900 RS
Strengths
- Torque from the basement
- Built for long days
- Tall-rider friendly ergonomics
- Fully adjustable at both ends
- Faster than it looks
Trade-offs
- Rear shock thumps sharp hits
- Loose through transitions
- No quickshifter offered
- No wind protection
- Stock seat uncomfortable on long rides
Z900 RS Black Ball Edition
What owners say
Strengths
- Smooth, characterful inline-four engine
- Timeless, high-quality retro styling
- Comfortable and relaxed ergonomics
- Modern electronic rider aids
Known problems to check before you buy
Z 900 RS
- Front tire may develop internal blistering (Sumitomo manufacturing defect) Due to a defective manufacturing process during sidewall rubber installation, the front tire may develop blistering on the inner surface. A tire with internal blistering can fail and increase crash risk. Tire supplier: Sumitomo Rubber Industries, Ltd. Non-compliant with FMVSS 119. Affects only MY2024 Z900RS ABS, Z900RS Café ABS, and Z900RS SE ABS.
- Rear brake line and ABS wheel speed sensor cable can contact rear tire During factory assembly, the rear brake line and wheel speed sensor cable may have been incorrectly routed, allowing them to contact the rear tire. This can damage the brake line (brake fluid loss, reduced braking performance) or sever the ABS sensor cable (ABS failure, incorrect speedometer reading). Affects both Z900 and Z900RS MY2018.
- ABS hydraulic unit contaminated with aluminum shavings The ABS hydraulic unit may have been contaminated with aluminum shavings during manufacturing (defective fixture shaving ABS pump housing). This can cause the front or rear wheel to lock up during braking despite ABS. Affects MY2019 Z900RS ABS and Z900RS Café ABS.
- False neutrals and clunky/agricultural shift action The gearbox occasionally misses shifts, especially during quick upshifts. Most frequently reported between 5th and 6th gear, but also from neutral to 1st when departing. Downshifts are agricultural and clunky. Higher-quality engine oil and correct shift lever position can alleviate the problem. Design-inherent, not an isolated defect — known from the Z900 platform, confirmed for the Z900RS.
- Front brake lacks sharp initial bite, spongy lever feedback Despite radial-mount four-piston Nissin calipers, the front brake lacks direct, firm initial bite. The lever feel is indirect, especially during aggressive downhill braking. Braided steel lines and higher-performance brake pads significantly improve feel. The SE model (from MY2022) with Brembo M4.32 calipers and braided steel lines resolves this issue from the factory.
- ABS activates prematurely, especially on front brake The Nissin ABS unit activates prematurely, especially at the front brake during harder braking. The ABS is not deactivatable on any 2018–2024 model year. This reduces confidence during aggressive braking and trail braking. The ABS kicks in earlier than desired.
- Footpegs scrape tarmac at moderate cornering speeds The lower and further-forward footpeg position (compared to Z900) combined with the factory-soft rear suspension setting (minimum preload from factory) causes the footpegs to scrape the road at moderate cornering speeds. The short feeler pegs ("Angstnippel") wear down quickly. Solution: increase rear shock preload by 3–5 turns.
- Snatchy, on-off throttle response at low RPM (ECU mapping) The Z900RS exhibits abrupt, jerky throttle behavior at low RPM and low speeds, particularly when rolling on throttle from closed, departing from standstill, and during gentle gas application in corners. The fuel-cut programming (overrun fuel cutoff for emissions compliance) causes abrupt injection on/off behavior. The dual throttle valve system (sub-throttle servo) with cable-operated main throttle exacerbates the issue. The problem is most pronounced on MY2018–2019 models. Common remedies: ECU reflash (e.g., Ivan's Performance), throttle cable adjustment. Later model years show improvement according to multiple sources.
- Engine revs to 2,500–4,000 rpm on cold start On cold start, the engine revs up to 2,500–4,000 rpm to bring the catalytic converter to operating temperature faster (Euro 4/5 emissions compliance). This is particularly intrusive in residential areas. It is not a defect but a deliberate ECU calibration for emissions standards. Some owners report occasional stalling during warm-up phase.
- Clutch judder/shudder when cold during takeoff The clutch exhibits pronounced judder when cold during engagement into first gear. Multiple owners report the problem partially persists after warm-up. Some dealers consider this normal behavior. Possible remedies: soak clutch plates in oil overnight (dealer recommendation), use higher-quality engine oil. The clutch judder when cold is a widely documented complaint.
Z900 RS Black Ball Edition
No confirmed faults on file yet. That's not the same as fault-free.
What they share
- Seat height
- 32.9 in (835 mm)
- Displacement
- 948 cc
- Engine
- Inline-four
- Cooling
- Liquid-cooled
- Fuel capacity
- 4.5 US gal (17 L)
- Gearbox
- 6-speed
- Final drive
- Chain
- Fork
- Upside-down (USD)
- Front tire
- 120/70-17
- Rear tire
- 180/55-17
- Wheelbase
- 57.9 in (1470 mm)
Where the spec sheets split
| Z 900 RS | Z900 RS Black Ball Edition | |
|---|---|---|
| Wet weight | 474 lb (215 kg) | 476 lb (216 kg) |
| Z 900 RS | Z900 RS Black Ball Edition | |
|---|---|---|
| Power | 111 hp (82 kW) | 117 hp (86 kW) |
| Peak power at | 8,500 rpm | 9,300 rpm |
| Torque | 73 lb-ft (98 Nm) | 72 lb-ft (98 Nm) |
| Peak torque at | 6,500 rpm | 7,700 rpm |
What comes fitted, what costs extra
| Z 900 RS | Z900 RS Black Ball Edition | |
|---|---|---|
| Ride Modes | Not offered | Standard |
| Cruise Control | Not offered | Standard |
| Smartphone Connectivity | Not offered | Standard |
| USB Charging Port | Option | Not offered |
Head to head, area by area
Both bikes on the same scale, one area at a time.