By ·

Motorcycle comparison · Supermoto

Husqvarna SM 630 (MY2009) vs KTM 690 SMC (MY2008)

Husqvarna SM 630 vs KTM 690 SMC: which one's easier to live with every day.

Into a tight bend, the Husqvarna SM 630 flicks onto its edge at the lightest push on the bar, and it'll change line mid-corner. On the KTM 690 SMC, the anti-hop clutch does the setup work, and you don't need race skills. The rear steps into a slide and doesn't fight you.

Husqvarna SM 630 (MY2009) and KTM 690 SMC (MY2008) side by side
Husqvarna SM 630 (MY2009) 2009–2011 · Tilts Hard, Costs Little KTM 690 SMC (MY2008) 2008–2011 · The Original Supermoto Riot

So which one do you buy?

The SM 630 has the edge if…

Keeping running costs low

Edges it: SM 630

On running costs, the SM 630 edges it. Not by enough to bank on.

Daily commuting & city riding

A touch ahead: SM 630

Through rush hour, the SM 630 is a little easier to live with. Only a little.

Which one's the smarter buy

Value's a wash

At these used prices, the value is even. Neither bike is the clear better buy for the money.

What makes each one tick

SM 630

The SM 630's single shoves hard the moment it leaves idle, and it doesn't run out of breath as it spins up top. The stock tune isn't happy at a small, steady throttle, where it can surge. Hard drive out of slow turns doesn't unsettle the steel trellis frame. The front wheel lofts on torque.

Nils rode the SM 630 in 2010 (NastyNils Testride).

690 SMC

Every switchback on Angeles Crest Highway shows how little the 690 SMC weighs, and the closer they stack, the less the bike asks of you. The brake lever and the slipper don't feel like separate controls on the approach. The rear pedal joins that move. The single lugs a gear tall without complaint.

Nils rode the 690 SMC in 2008 and 2010 (NastyNils Testride).

The Voice of Experience

Portrait of NastyNils

What actually separates them

  • The 690 SMC has the lower seat: 34.4 in (875 mm) vs 35.8 in (910 mm).
  • The 690 SMC makes more peak power: 63 hp (46 kW) vs 48 hp (35 kW).
  • The 690 SMC makes more peak torque: 47 lb-ft (64 Nm) vs 31 lb-ft (42 Nm).

See every difference ↓

Which one for the way you ride

They come out level on track days, twisty roads, and a first bike. The better-kept used example is the smarter money.

Who each one is built for

SoCal Canyon Performance Rider

Angeles Crest Highway · Coronado Trail Scenic Byway · Big Sur Coast Highway

Texas Hill Country Weekend Rider

Texas Hill Country · Twisted Sisters · Circuit of The Americas

Appalachian Technical Corner Rider

Back of the Dragon · Blue Ridge Parkway · Cherohala Skyway

What's good, and what you'll live with

SM 630

What owners say

Strengths

  • Punchy, smooth single-cylinder engine
  • Playful yet stable chassis
  • Powerful Brembo braking

Trade-offs

  • Inconsistent low-speed fueling

690 SMC

From Nils' own saddle time

Strengths

  • Wheelies On Demand
  • Featherweight In The Twisties
  • Braking Becomes One Move
  • Punch Without The Anxiety
  • Approachable Corner Slides

Trade-offs

  • No Highway Wind Protection
  • Front Goes Quiet At The Limit
  • Rocker Bearings Wear Early

Known problems to check before you buy

SM 630

No confirmed faults on file yet. That's not the same as fault-free.

690 SMC

  • Rocker arm bearing failure The rocker arm bearings are prone to premature wear and failure, often as early as 3,000 mi (4,800 km). Replacement is recommended at each valve check.
  • Fuel pump/filter clogging The in-tank fuel filter can clog, causing fuel pump starvation, hard starting, and stalling. Regular replacement is advised.
  • Injector and electrical gremlins Faulty injectors and electrical connection issues can lead to intermittent starting problems, rough running, and warning lights.
  • High oil consumption Many owners report that the engine burns oil, especially when ridden hard. Frequent oil level checks are essential to avoid damage.

What they cost used

These prices compare a 15-year-old SM 630 with a 15-year-old 690 SMC.

SM 630
about $3,900
690 SMC
about $3,900

What they share

Engine
Single-cylinder
Cooling
Liquid-cooled
Gearbox
6-speed
Final drive
Chain
Fork
Upside-down (USD)
Front tire
120/70-17

Where the spec sheets split

Seat height and weight
SM 630 690 SMC
Seat height 35.8 in (910 mm) 34.4 in (875 mm)
Dry weight 357 lb (162 kg) 335 lb (152 kg)
Engine, power and torque
SM 630 690 SMC
Displacement 600 cc 654 cc
Power 48 hp (35 kW) 63 hp (46 kW)
Torque 31 lb-ft (42 Nm) 47 lb-ft (64 Nm)
Fuel tank capacity
SM 630 690 SMC
Fuel capacity 3.2 US gal (12 L) 3.6 US gal (13.5 L)
Other specifications
SM 630 690 SMC
Rear tire 150/60-17 160/60-17

What comes fitted, what costs extra

SM 630 690 SMC
Slipper Clutch Not offered Standard

Head to head, area by area

Both bikes on the same scale, one area at a time.

Braking

Engine

Handling

Suspension

Comfort

Reliability

Practicality

Sporting Capability

Usability

Specs and equipment as of November 6, 2026. The riding calls use the same ratings behind both buyer's guides.