By ·

Motorcycle comparison · Naked Bike

Yamaha MT-07 (RM04) vs Honda CB500F (PC 58)

Yamaha MT-07 vs Honda CB500F: which one's easier to live with every day.

You'll crack the throttle on the Yamaha MT-07 at a green light, and the front wheel's already lifting off the paint. The Honda CB500F rolls away in one even pull.

Yamaha MT-07 (RM04) and Honda CB500F (PC 58) side by side
Yamaha MT-07 (RM04) 2014–2017 · Raw Twin, Weightless Handling Honda CB500F (PC 58) 2016–2018 · Reliable Naked, Zero Fuss

So which one do you buy?

The MT-07 has the edge if…

Sporty riding on twisty roads

Inches ahead: MT-07

Back-road fun leans slightly toward the MT-07. Put it down to harder acceleration. It's a narrow call, so trust your test ride.

The CB500F has the edge if…

Traveling with luggage

Small edge: CB500F

Loaded for the road, the CB500F comes out a touch ahead. What tips it: a better reliability record. Don't read too much into a gap this narrow.

Which one's the smarter buy

No clear advantage

The Honda CB500F costs less, but that gap doesn't make it the clear better buy for the money. Neither bike wins on value alone.

What makes each one tick

MT-07

Low in the MT-07's frame, a crossplane twin thumps like a V-twin and shoves hard from low revs, while the 401 lb (182 kg) chassis flicks into a bend almost like a supermoto. The bars don't need coaxing. Over a mid-corner bump, the fork and shock do their job for the class, and there's no weak spot showing. Yamaha left the twin untamed.

CB500F

Sitting tall behind a wide bar, you'll cover long highway stretches on the CB500F before anything starts to ache. Its twin answers more throttle without a jolt, and there's barely any buzz in the pegs. The chassis steers without surprises. The padded seat's still cushioning you hours later.

The Voice of Experience

Portrait of NastyNils

What actually separates them

  • The CB500F has the lower seat: 30.9 in (785 mm) vs 31.7 in (805 mm).
  • The MT-07 has the lower wet weight: 401 lb (182 kg) vs 419 lb (190 kg).
  • The MT-07 makes more peak power: 75 hp (55 kW) vs 48 hp (35 kW).

See every difference ↓

Which one for the way you ride

Comfortable long-distance riding

Neither one fits

Long-haul comfort is a weak spot for both. If you tour, shop with that in mind.

There's no real gap on commuting and a first bike. Sit on both and let fit and price decide.

Who each one is built for

Appalachian Technical Corner Rider

Back of the Dragon · Blue Ridge Parkway · Cherohala Skyway

SoCal Canyon Performance Rider

Angeles Crest Highway · Coronado Trail Scenic Byway · Big Sur Coast Highway

Texas Hill Country Weekend Rider

Texas Hill Country · Twisted Sisters · Circuit of The Americas

What's good, and what you'll live with

MT-07

Strengths

  • Easy To Trust Quickly
  • Cheap To Run
  • Light, Friendly Controls
  • Addictive CP2 engine character
  • Accessible for all skill levels

Trade-offs

  • Idle And Decel Cutouts
  • Fragile 5th Gear
  • Quick To Corrode
  • Budget build quality
  • Jerky throttle response at low RPM

CB500F

What owners say

Strengths

  • Honda reliability and build quality
  • Smooth, tractable engine

Known problems to check before you buy

MT-07

  • Intermittent engine cutout at idle and during deceleration The engine cuts out intermittently, especially when idling at traffic lights or decelerating to a stop. The ECU appears to reduce fuel supply too aggressively at idle. Problem worsens in hot weather. Stalling during downshifting is particularly hazardous. Multiple NHTSA consumer complaints filed. Reportedly improved with ECU mapping adjustments in later production.
  • Battery loses charge during extended standstill Battery depletes when the bike sits for extended periods. Components draw power even when ignition is off. On models with parking light position, the ignition switch can cause parasitic draw if moisture enters. Some owners report charging system issues linked to the regulator/rectifier.
  • Instrument cluster LCD flickers, goes blank, or shows partial information LCD display develops flickering, blank sections, or complete failure. Causes include loose internal ribbon cable, water ingress, or corroded connector pins. Aftermarket replacement LCD modules available (same part 2014–2020 compatible).
  • Pronounced clutch rattle at idle; potential inner plate failure Pronounced rattling noise from the clutch at idle in neutral. Noise disappears when clutch lever is pulled in. In severe cases, inner clutch plates can break or shatter. Contributing factor may be worn clutch basket. More pronounced on cold starts.
  • Gear indicator fails to display correct gear (especially 5th/6th) The gear indicator in the LCD display fails to show the correct gear, particularly in 5th and 6th gear. The number flashes, disappears, or displays incorrect values. Root cause: dirty contacts on the gear position sensor. Cleaning is a temporary fix; sensor replacement (~40 USD) is the permanent solution. Yamaha developed a revised sensor.
  • Poor surface finishes on fasteners and coolant pipes Widespread corrosion across peripheral components: radiator coolant pipes (chrome with thin lacquer, deteriorates rapidly from road spray), allen key bolt heads, brake line fittings, disc bobbins, gear lever linkage, rear sprocket, suspension linkage fasteners, and seat lock (seizes). Screw heads across the frame show rust. Weld slag not properly cleaned on some frames.
  • Side stand safety switch causes unexpected engine cutout The bike starts normally in neutral but dies immediately when shifted into gear. Caused by the kickstand safety switch failing, corroding, or the starter cutoff relay malfunctioning. The switch connector is vulnerable to moisture ingress.
  • Surface rust on steel swingarm The steel swingarm develops surface rust, particularly underneath the chain guard and near chain adjusters. Rust can appear within months of purchase, even without winter riding. The paint/coating is thin and easily damaged by chain debris. Weld seams and areas under the chain slider are most affected. Yamaha has replaced some swingarms under warranty.

CB500F

No confirmed faults on file yet. That's not the same as fault-free.

What they cost used

These prices compare a 10-year-old MT-07 with a 10-year-old CB500F.

MT-07
about $6,000
CB500F
about $4,200

At ten years old, the Yamaha MT-07 sits around $6,000 while the Honda CB500F lands near $4,200. That's an $1,800 gap in the CB500F's favor. These are US market estimates, not live listings.

What they share

Engine
Parallel twin
Cooling
Liquid-cooled
Gearbox
6-speed
Final drive
Chain
Fork
Telescopic
Front tire
120/70-17

Where the spec sheets split

Seat height and weight
MT-07 CB500F
Seat height 31.7 in (805 mm) 30.9 in (785 mm)
Wet weight 401 lb (182 kg) 419 lb (190 kg)
Engine, power and torque
MT-07 CB500F
Displacement 689 cc 471 cc
Power 75 hp (55 kW) 48 hp (35 kW)
Peak power at 9,000 rpm 8,500 rpm
Torque 50 lb-ft (68 Nm) 32 lb-ft (43 Nm)
Peak torque at 6,500 rpm 7,000 rpm
Top speed 130 mph (210 km/h) 112 mph (180 km/h)
Fuel economy and tank capacity
MT-07 CB500F
Fuel economy 53 mpg (US) / 4.4 L/100 km 69 mpg (US) / 3.4 L/100 km
Fuel capacity 3.7 US gal (14 L) 4.4 US gal (16.7 L)
Other specifications
MT-07 CB500F
Front brake 282 mm 320 mm
Rear tire 180/55-17 160/60-17
Wheelbase 55.1 in (1400 mm) 55.5 in (1410 mm)

What comes fitted, what costs extra

MT-07 CB500F
ABS Option Standard
Manually Adjustable Front Suspension Not offered Standard
LED Headlight Not offered Standard

Head to head, area by area

Both bikes on the same scale, one area at a time.

Braking

Engine

Handling

Suspension

Comfort

Reliability

Practicality

Sporting Capability

Usability

Specs and equipment as of November 6, 2026. The riding calls use the same ratings behind both buyer's guides.