By ·

Motorcycle comparison · Supersport

BMW S 1000 RR (K46) vs Aprilia RSV4 Factory APRC ABS (MY2011)

BMW S 1000 RR vs Aprilia RSV4 Factory APRC ABS: which one to buy for the riding you do.

Push the BMW S 1000 RR through a wet, dusty bend and it's corrected and moved on before you notice. On the Aprilia RSV4 Factory APRC ABS, you'll change your mind halfway through that bend and pick a new line. It swings onto that line without protest.

BMW S 1000 RR (K46) and Aprilia RSV4 Factory APRC ABS (MY2011) side by side
BMW S 1000 RR (K46) 2009–2018 · The Top-End That Won't Quit Aprilia RSV4 Factory APRC ABS (MY2011) 2011–2014 · Raw V4 With Real Depth

So which one do you buy?

The S 1000 RR has the edge if…

Keeping running costs low

Small edge: S 1000 RR

Over a year of riding, the S 1000 RR noses ahead on running costs. A neglected example would wipe that out.

Daily commuting & city riding

Inches ahead: S 1000 RR

Your daily ride leans slightly toward the S 1000 RR. Fit and price can easily outweigh that.

Which one's the smarter buy

No clear advantage

The Aprilia RSV4 Factory APRC ABS costs less, but that doesn't make it the better buy. Neither bike is the clear winner on value alone. Your choice depends on what you want it for.

What makes each one tick

S 1000 RR

On long, fast sweepers the S 1000 RR's frame settles into its lean and holds it there. The front doesn't leave you guessing. Off the apex, the inline-four answers the throttle with a steady push, and the traction control trims the drive instead of cutting it dead. The rear tire hooks up early and keeps driving.

Nils rode the S 1000 RR in Portugal in 2009, in Andalusia, Austria, Slovakia, and the Czech Republic in 2010, in Andalusia, Hungary, Slovakia, and the Eifel in 2011, in Andalusia and Spain in 2012, in 2014, in Andalusia in 2015, in Oman & UAE in 2016, and in Qatar in 2017 (NastyNils Testride).

RSV4 Factory APRC ABS

There's a hard hit and a raw bark behind the RSV4's wild liter-class look. At the exit the throttle lags behind the rear tire, and the drive builds so evenly that it's easy to miss what's coming. The lever needs barely a squeeze. The Brembos haul it down hard and keep their feel.

Nils rode the RSV4 Factory APRC ABS in 2012 (NastyNils Testride).

The Voice of Experience

Portrait of NastyNils

What actually separates them

  • The S 1000 RR has the lower seat: 32.1 in (815 mm) vs 33.3 in (845 mm).
  • The S 1000 RR makes more peak power: 199 hp (146 kW) vs 180 hp (132 kW).
  • ABS: standard (from 2013) on the RSV4 Factory APRC ABS, option on the S 1000 RR.

See every difference ↓

Which one for the way you ride

A confidence-building first motorcycle

Wrong job for both

Neither one is where you should learn. Get a season on something gentler first.

They come out level on track days and twisty roads. The better-kept used example is the smarter money.

Who each one is built for

US Trackday & Apex Hunter

Barber Motorsports Park · WeatherTech Raceway Laguna Seca · Circuit of The Americas

SoCal Canyon Performance Rider

Angeles Crest Highway · Coronado Trail Scenic Byway · Big Sur Coast Highway

Appalachian Technical Corner Rider

Back of the Dragon · Blue Ridge Parkway · Cherohala Skyway

What's good, and what you'll live with

S 1000 RR

Strengths

  • Top End Never Signs Off
  • Traction Control That Trims
  • Clutchless In Both Directions
  • Planted In Fast Sweepers
  • Class-leading peak power

Trade-offs

  • It Does Not Flick
  • Thin Below The Power Band
  • City Riding Is Work
  • Brake Lever Point Migrates
  • Snatchy throttle response (2010–2011)

RSV4 Factory APRC ABS

Strengths

  • Turn-In You Can Trust
  • Brutal Brakes, Light Lever
  • Bottomless Setup Range
  • No Corners Cut
  • The Image Is Earned

Trade-offs

  • Corner Exit Is Work
  • Race Ergonomics, No Mercy
  • Tall Riders, Buy The Screen
  • Below-average reliability and high maintenance costs

Known problems to check before you buy

S 1000 RR

  • Fuel pump flange may crack and leak fuel Recall 20V471000 The pneumatic fastening tool used at the fuel-pump supplier introduced stress at the pump flange during assembly. Over time, cracks can propagate at the flange and fuel can leak — fire risk in the presence of an ignition source. The recall covers MY2010–MY2011 S 1000 RR within a much larger 50,184-unit BMW two-wheel campaign that also covered other BMW Motorrad models. Remedy: dealer reinforces the flange with a support ring or replaces the fuel pump. A follow-up campaign (NHTSA 20V471) replaces fuel pumps that received only the support-ring repair under 13V617.
  • Sachs suspension underdamped for spirited / track use (especially 2010) The 2010 Sachs front fork is widely judged underdamped for spirited or track use; damping was improved in 2011 within the same generation. Cartridge re-valving is non-trivial because Sachs uses non-standard shim sizes — most track riders fit aftermarket cartridge kits. The Sachs rear shock is not user-rebuildable, and seal leaks have been reported.
  • Quickshifter intermittent or inoperative — wiring/connector at shift sensor Quickshifter stops working intermittently or completely. Documented root cause is most often the wiring or connector at the shift-sensor side rather than the sensor itself; BMW issued a service measure on the shift sensor. Some dealers misdiagnose and replace the sensor unnecessarily before fixing the wiring.
  • Balance-pipe / exhaust valve servomotor failure On MY2015–2016 K46 bikes (and some MY2017–2018), the balance-pipe valve servomotor bushing wears, the actuating cables can break, or the servo can seize in the activated position. Symptom: loud clicking on ignition, fault code, valve stuck open or closed. BMW has replaced full header systems under warranty in some documented cases. Aftermarket "servo eliminator" devices (HealTech, Servo Buddy) are common workarounds.
  • DDC dashboard error / calibration failure On MY2015–2018 K46 bikes optioned with DDC (Dynamic Damping Control), a "DDC!" dashboard warning or calibration failure can appear. Documented root causes include corroded or loose battery terminals, CAN-bus faults, and rear travel sensor displacement. Often resolves with re-calibration or wiring fix; in some cases the DDC shock has been replaced under warranty.
  • Brake judder / pulsing at the lever, mostly under track / hard road use Brake judder reported at the lever after hard use. Community consensus is that the cause is most often uneven pad-material deposit on the stock rotors (rather than true disc warpage), with stock pads judged inadequate for sustained track use. Common owner fix: switch to higher-spec pads (e.g., Brembo Z04) or upgraded discs.
  • Cam chain rattle at cold start (cam chain tensioner spring pressure) Loud cam chain rattle, particularly on cold start. BMW issued a service measure that replaces the original BLACK screw plug at the cam chain tensioner with a longer SILVER screw plug to increase tensioner spring pressure. The fix is applied only after approximately 9,300 mi (15,000 km) and only when the symptom is documented. Some owners switch to aftermarket manual cam chain tensioners (e.g., Alpha Racing) for track use. No engine failures attributed to the rattle in documented sources.
  • Vibration through tank, handlebars and pegs above 6,000 rpm Distinct vibration through tank, bars, footpegs and mirrors, intensifying past approximately 10,000 rpm. The K46 inline-four has no secondary balancer. Mirrors can blur at sustained high revs.
  • Aluminium frame transfers significant heat to rider's inner legs The aluminium twin-spar frame (used as a load-bearing element with the engine inclined into it) transfers significant engine and exhaust heat to the rider's inner legs, particularly in low-speed traffic and warm weather. Documented across all K46 model years. Common owner-installed mitigation: aftermarket carbon frame covers (e.g., Ilmberger).

RSV4 Factory APRC ABS

No confirmed faults on file yet. That's not the same as fault-free.

What they cost used

These prices compare a 12-year-old S 1000 RR with a 12-year-old RSV4 Factory APRC ABS.

S 1000 RR
about $12,600
RSV4 Factory APRC ABS
about $11,400

At 12 years old, the BMW S 1000 RR sits around $12,600 while the Aprilia RSV4 Factory APRC ABS lands near $11,400. That puts the Aprilia about $1,200 cheaper. These are US market estimates, not live listings.

What they share

Wet weight
450 lb (204 kg)
Displacement
999 cc
Cooling
Liquid-cooled
Gearbox
6-speed
Final drive
Chain
Front brake
320 mm

Where the spec sheets split

Seat height and weight
S 1000 RR RSV4 Factory APRC ABS
Seat height 32.1 in (815 mm) 33.3 in (845 mm)
Engine, power and torque
S 1000 RR RSV4 Factory APRC ABS
Engine Inline-four V4
Power 199 hp (146 kW) 180 hp (132 kW)
Peak power at 13,500 rpm 12,500 rpm
Torque 83 lb-ft (113 Nm) 84 lb-ft (114 Nm)
Peak torque at 10,500 rpm 10,000 rpm
Fuel tank capacity
S 1000 RR RSV4 Factory APRC ABS
Fuel capacity 4.6 US gal (17.5 L) 4.5 US gal (17 L)
Other specifications
S 1000 RR RSV4 Factory APRC ABS
Front tire 120/70 ZR17 120/70-17
Rear tire 190/55 ZR17 190/55-17

What comes fitted, what costs extra

S 1000 RR RSV4 Factory APRC ABS
ABS Option Standard (from 2013)
Wheelie Control Option Standard
Launch Control Option Standard
Quickshifter Option Standard

Head to head, area by area

Both bikes on the same scale, one area at a time.

Braking

Engine

Handling

Suspension

Comfort

Reliability

Practicality

Sporting Capability

Usability

Specs and equipment as of November 6, 2026. The riding calls use the same ratings behind both buyer's guides.